
Raking Shores
Design of raking shores to support walls during demolition, alteration or repair, with calculations and site ready drawings.
Temporary Works
Shoring designs that keep walls safely supported while the structure around them changes.

Our shoring design service gives contractors and temporary works coordinators safe, buildable designs for supporting walls. Shoring gives a wall temporary support when the structure around it changes, for example when a neighbouring building is demolished, a wall is opened up, or repairs are carried out on a wall that has moved.
We design two main types. Raking shores run from the face of the wall down to a base on the ground. Flying shores span between two parallel walls where there is no room, or no suitable ground, for a raking shore.
Each design is worked out around the wall, the loads it needs to resist and what the shores bear on. You receive calculations and clear drawings that your site team can build from and your temporary works coordinator can review and approve.
We design shoring for sites across the UK and Ireland from our headquarters in Sheffield and our office in Cockermouth. See our temporary works services for other designed solutions.
Shoring Design
Which type suits your job depends on the wall, the space at its base and what is happening next to it.

Design of raking shores to support walls during demolition, alteration or repair, with calculations and site ready drawings.

Design of flying shores between parallel walls, for example after a mid terrace building is demolished.
Our process
Share drawings or photos of the wall, what's happening next to it and how long support is needed.
We review your brief, then confirm scope, price and delivery date in your quote.
We assess the wall, the loads and the ground, then design the shoring. We agree a delivery date with you in every quote, to suit your programme.
You receive calculations and drawings ready for your temporary works coordinator and site team.
What we need from you
Send what you have. If anything's missing, we'll ask.
FAQs
A raking shore is an inclined prop, or set of props, that runs from the face of a wall down to a base on the ground. A flying shore spans between two parallel walls and braces them against each other, without needing support from the ground.
It depends on the wall, the loads and the space available. Raking shores need room at the base of the wall. Where that room isn't there, for example after a mid terrace building is demolished, a flying shore may be more suitable. Send us the details and we'll recommend the best option.
Whenever a wall needs temporary support, the shoring should be designed for the loads it will carry. Your temporary works coordinator will usually ask for a design and calculations before the shores go up.
Yes. We can design shoring in timber, steel, scaffold tube or proprietary propping, to suit the materials you have or prefer.
Temporary Works
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Temporary support for retained facades during demolition and redevelopment, designed around the facade, the site and the programme.
Design of timber shoring, needling, propping and support structures, with calculations and clear details.
Design of formwork for concrete walls, columns, slabs and bases, with calculations and drawings your site team can build from.
Design of bases, ties, landings and scaffold interfaces for construction hoists and mast climbing work platforms (MCWPs).
Design of temporary demountable structures for events, including stages and roofs, grandstands and seating, towers and platforms, and banner frames, entrance features and walkways.
Send us your drawings and details. We reply to every enquiry within 24 hours.