Crane Mats
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Temporary Works
Raking shore designs that give walls safe, stable lateral support while work goes on around them.

Our raking shore design service gives contractors and temporary works coordinators safe, buildable designs for supporting walls. Raking shores provide lateral support to a wall when the structure around it changes, for example when a neighbouring building is demolished, a wall is opened up, or repairs are carried out on a wall that has moved.
We design each raking shore around the wall, the loads it needs to resist and the ground the shores bear on. That includes the number, spacing and angle of the shores, the connections to the wall, and the bases or sole plates that spread the load. Where space at the base of the wall is limited, we’ll look at the best alternative, such as a flying shore.
You receive calculations and clear drawings that your site team can build from and your temporary works coordinator can review and approve.
We design raking shores for sites across the UK and Ireland from our headquarters in Sheffield and our office in Cockermouth. See our temporary works services for other designed solutions.
Our process
Share drawings or photos of the wall, what's happening next to it and how long support is needed.
We confirm scope, price and delivery date.
We assess the wall, the loads and the ground, then design the shoring. This typically takes 5 to 7 working days, depending on the size and type of project and your requirements.
You receive calculations and drawings ready for your temporary works coordinator and site team.
What we need from you
Send what you have. If anything's missing, we'll ask.
FAQs
A raking shore is an inclined prop, or set of props, that runs from the face of a wall down to a base on the ground. It gives the wall lateral support, for example when an adjoining building is demolished or the wall is being repaired or altered.
Whenever a wall needs temporary support, the shoring should be designed for the loads it will carry and the ground it bears on. Your temporary works coordinator will usually ask for a design and calculations before the shores go up.
Yes. We can design raking shores in timber, steel, scaffold tube or proprietary propping, to suit the materials you have or prefer. If you're not sure which is best, we'll recommend the most suitable option for the loads, the duration and the site.
Tell us about the space available. Where raking shores won't fit, a flying shore or another temporary works solution may be more suitable.
Temporary Works
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Design of flying shores between parallel walls, for example after a mid terrace building is demolished.
Temporary support for retained facades during demolition and redevelopment, designed around the facade, the site and the programme.
Design of timber shoring, needling, propping and support structures, with calculations and clear details.
Design of formwork for concrete walls, columns, slabs and bases, with calculations and drawings your site team can build from.
Design of bases, ties, landings and scaffold interfaces for construction hoists and mast climbing work platforms (MCWPs).
Design of temporary demountable structures for events, including stages and roofs, grandstands and seating, towers and platforms, and banner frames, entrance features and walkways.
Send us your drawings and details. We reply to every enquiry within 24 hours.