Crane Mats
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Temporary Works
Timber temporary works designs that are practical to build with materials readily available on site.

Our timber temporary works design service gives contractors practical, buildable designs using timber, a material that’s light, easy to work on site and widely available. Many temporary works, from shoring a wall to supporting a structure while an opening is formed, can be designed safely and economically in timber.
We design timber shoring, needling, propping and other temporary supports around the loads involved and what the timber bears on. Each design sets out the member sizes, strength grades, connections and bearings needed, so the right materials can be ordered and the work built correctly first time.
Where timber isn’t the best choice, for example for heavier loads or longer spans, we’ll recommend steel or a proprietary system instead. See also our raking shore and flying shore design services.
You receive calculations and clear drawings ready for your temporary works coordinator to review and for your site team to build from.
We design timber temporary works for sites across the UK and Ireland from our headquarters in Sheffield and our office in Cockermouth.
Our process
Share drawings or photos and tell us what needs supporting and for how long.
We confirm scope, price and delivery date.
We design the timber members, connections and bearings for the loads involved. This typically takes 5 to 7 working days, depending on the size and type of project and your requirements.
You receive calculations and drawings ready for your temporary works coordinator and site team.
What we need from you
Send what you have. If anything's missing, we'll ask.
FAQs
Common examples include timber raking and flying shores, needling to support walls while openings are formed, dead shores, propping, and temporary platforms and supports.
Timber is light, easy to cut and fix on site, and widely available, which makes it a practical choice for many smaller temporary works. For heavier loads or longer spans, steel or proprietary systems may be more suitable, and we'll tell you if so.
Yes. Our designs state the member sizes and strength grades needed, so the right timber can be ordered and checked on delivery.
Yes. For permanent timber beams, joists and roof structures, see our timber design service.
Temporary Works
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Design of raking shores to support walls during demolition, alteration or repair, with calculations and site ready drawings.
Design of flying shores between parallel walls, for example after a mid terrace building is demolished.
Temporary support for retained facades during demolition and redevelopment, designed around the facade, the site and the programme.
Design of formwork for concrete walls, columns, slabs and bases, with calculations and drawings your site team can build from.
Design of bases, ties, landings and scaffold interfaces for construction hoists and mast climbing work platforms (MCWPs).
Design of temporary demountable structures for events, including stages and roofs, grandstands and seating, towers and platforms, and banner frames, entrance features and walkways.
Send us your drawings and details. We reply to every enquiry within 24 hours.