Crane Mats
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Temporary Works
Flying shore designs that brace walls across a gap without needing support from the ground.

Our flying shore design service helps contractors keep neighbouring walls safe when the building between them is removed. A flying shore spans the gap between two walls and braces one against the other, so the walls stay stable while the space below remains clear for demolition, construction and deliveries.
Flying shores are common on terraced streets and town centre sites, where removing one building leaves the walls on either side without the support they relied on. We design each flying shore around both walls, the span between them and the loads involved, with connections and wall plates detailed to suit the existing construction.
Where a flying shore isn’t the right answer, for example on a very wide gap or a single wall, we’ll recommend an alternative such as raking shores or a facade retention scheme.
You receive calculations and clear drawings ready for your temporary works coordinator to review and for your site team to build from.
We design flying shores for sites across the UK and Ireland from our headquarters in Sheffield and our office in Cockermouth.
Our process
Share drawings or photos of both walls, the gap between them and the planned work.
We confirm scope, price and delivery date.
We assess both walls and the span, then design the shoring. This typically takes 5 to 7 working days, depending on the size and type of project and your requirements.
You receive calculations and drawings ready for your temporary works coordinator and site team.
What we need from you
Send what you have. If anything's missing, we'll ask.
FAQs
A flying shore is a horizontal strut, usually with inclined rakers, that spans between two walls and braces one against the other. Because it doesn't need support from the ground, the space below stays clear for work to carry on.
Typically when a building between two others is demolished, leaving the walls of the neighbouring buildings without the support they had before. It suits gaps where raking shores at ground level would get in the way.
Every project is different, and the span depends on the walls, the loads and the materials used. Send us the dimensions and we'll tell you whether a flying shore suits the gap, and design it to your project's needs.
Yes. Because we design scaffolds as well as temporary works, we can design shoring and access scaffolding to work together on the same site.
Temporary Works
Designs and calculations for crane mats and outrigger pads, matched to the crane, the lift and the ground conditions.
Design of raking shores to support walls during demolition, alteration or repair, with calculations and site ready drawings.
Temporary support for retained facades during demolition and redevelopment, designed around the facade, the site and the programme.
Design of timber shoring, needling, propping and support structures, with calculations and clear details.
Design of formwork for concrete walls, columns, slabs and bases, with calculations and drawings your site team can build from.
Design of bases, ties, landings and scaffold interfaces for construction hoists and mast climbing work platforms (MCWPs).
Design of temporary demountable structures for events, including stages and roofs, grandstands and seating, towers and platforms, and banner frames, entrance features and walkways.
Send us your drawings and details. We reply to every enquiry within 24 hours.