Skip to content

Temporary Works

Crane Mats

Crane mat and outrigger pad designs that spread loads safely into the ground.

Looking up at a yellow tower crane beside a glass office tower under construction

Overview

Our crane mat design service helps contractors, lifting teams and temporary works coordinators make sure the ground beneath a crane can safely carry the loads from its outriggers or tracks. A correctly designed crane mat spreads those loads so the ground isn’t overloaded and the crane stays stable throughout the lift.

Every design starts with the crane, the lift and the ground. We take the outrigger or track loads for your lift, look at the ground conditions and anything below the surface, and design mats or pads to suit. Where the ground information is limited, we’ll tell you what extra information would make the design more economical.

Crane mats are often needed on made ground, near excavations or retaining walls, over buried services, and on slabs or surfacing whose strength isn’t known. Getting the design right protects people, the crane and the programme.

You receive a design with calculations and a clear layout drawing to include in your lift plan and temporary works records.

We design crane mats for sites across the UK and Ireland from our headquarters in Sheffield and our office in Cockermouth. See our temporary works services for other designed solutions.

Our process

How it works

  1. Step 1: Send the lift details

    Share the crane, outrigger loads, lift plan and site information.

  2. Step 2: Quote within 24 hours

    We confirm scope, price and delivery date.

  3. Step 3: Design

    We assess the loads and ground, then design the mats or pads. This typically takes 5 to 7 working days, depending on the size and type of project and your requirements.

  4. Step 4: Issue

    You receive the design, calculations and layout drawing, ready for your lift plan.

What we need from you

Information to send for a quote

Send what you have. If anything's missing, we'll ask.

  • Crane make and model, and configuration for the lift
  • Outrigger or track loads from the crane supplier or lift planner
  • Proposed crane position and site layout
  • Ground information (site investigation, plate bearing tests or known ground conditions)
  • Details of any buried services, voids, slabs or basements nearby
  • Type and size of mats available, if already chosen
  • Lift date

FAQs

Frequently asked questions

When do crane mats need a designed solution?

When the ground or surface under the crane can't be shown to safely carry the outrigger or track loads. This is common on made ground, near excavations, over buried services or on slabs and hardstandings of unknown strength. Industry guidance on crane stability recommends that the ground and any mats are properly assessed.

What information do you need from the crane supplier?

The maximum outrigger or track loads for the lift, along with the crane configuration. Your crane supplier or appointed person for lifting can usually provide these.

Do I need a ground investigation?

Not always. It depends on what's known about the site. Where there isn't enough information, we'll tell you what testing would help, such as plate bearing tests.

Can you design mats for repeated lifts or long term crane bases?

Get in touch with the details. We'll tell you whether a crane mat design suits your situation or whether a different temporary works solution is needed.

Temporary Works

Other temporary works services

Temporary Works overview

Raking Shores

Design of raking shores to support walls during demolition, alteration or repair, with calculations and site ready drawings.

Flying Shores

Design of flying shores between parallel walls, for example after a mid terrace building is demolished.

Facade Retention

Temporary support for retained facades during demolition and redevelopment, designed around the facade, the site and the programme.

Timber Temporary Works

Design of timber shoring, needling, propping and support structures, with calculations and clear details.

Formwork Design

Design of formwork for concrete walls, columns, slabs and bases, with calculations and drawings your site team can build from.

Hoist & MCWP Design

Design of bases, ties, landings and scaffold interfaces for construction hoists and mast climbing work platforms (MCWPs).

Temporary Event Structures

Design of temporary demountable structures for events, including stages and roofs, grandstands and seating, towers and platforms, and banner frames, entrance features and walkways.

Need help with Crane Mats? Tell us about your project.

Send us your drawings and details. We reply to every enquiry within 24 hours.